Meguair’s Ultimate Snow Foam G191564 1.89L

Description

• Unique pH neutral formula-Won’t strip wax!
• The ultimate way to deliver a swirl-free wash and shine.
• Xtreme Cling Foam outlasts others on coated, waxed or sealed finishes.
• Use with foam cannon and pressure washer.
• Intense foam clings & clings on paint and gently loosens road grime on lighted soiled cars ahead of the pressure rinse-yet also lubricates surface on dirtier vehicle for when a wash mitt is required.
• Versatile product used in 2 ways : either as a pre-wash prior to traditional two-bucket method or used with a premium wash mitt.
• Great for soft paints –foam creates high lubricity between wash mitt and paint, minimizing the risk of marring soft paints.

 

DIRECTIONS:

• The car should be cool to the touch & in the shade.
• Gently mix 1 part of Meguiar’s® Ultimate Snow Foam to 5 parts water in your foam cannon bottle.
• Completely pre-rinse your vehicle with clean water to remove loose dirt, grime & soiling.
• Starting at the bottom, apply Ultimate Snow Foam to the entire vehicle & allow it to dwell until the foam just begins to break. Do not allow the product to dry or freeze on the surface.
• For lightly dirty vehicles , simply follow with a pressure rinse. Dirtier vehicles may require use of a Meguiar’s wash mitt, followed by a pressure rinse.
• Pressure rinse before your normal wash mitt car wash.
• Dry the vehicle using a quality drying towel like our Meguiar’s Supreme Drying Towel (X1905EU) or Meguiar’s Water Magnet (X2000EU )to avoid water spots & apply your favourite Meguiar’s spray wax for added protection.
• TIP: If Meguiar’s Ultimate Snow Foam doesn’t cling, it’s a sure sign that it’s time to wax, seal or coat your car’s finish!
• Store Meguiar’s Ultimate Snow Foam above 7°C.Don not freeze.If this occurs, allow product to gradually return to room temperature before using, but do not heat.