VCROM V1 2K Clearcoat Set | QDS Clear (1L) + Hardener(0.5L)

RM53.00

3 in stock

Category: Tag:

READY STOCK & VALUE BUY

100% GENUINE VCROM PRODUCT

*** DESCRIPTION

– 2 component clear to be used in clear over base system.

-Composition based on acrylic copolymer.

PROPERTIES :

– Easy to apply

– Fast drying (Sanding & polishing after 2 hours at 32°c )

– Completed the work at the same day

– Save energy and time

– Can apply at car body, motor parts, sport rim and metal

MIXING RATIO : VOLUME / WEIGHT -V1 Clear : 2 / 100 -V1 Hardener : 1 / 50 -Thinner : 0.2-0.4 / 5%-20% -Potlife at 30°c , 2-3 hours

REMARK

-Activator can must be tightly closed immediately after use, HV1 will react with humid air and water and lose their hardening effect.

-Activated material cannot be poured back into non-activated material.

-Dry spray spots in the clear can be worked off with VCROM Blending Thinner at very low spray pressure. This should be done at the latest 10 min. after clear application ( to be avoided on horizontal parts.)

– For structured and/or flat clears, see specific TDS.

-Material has to be at normal room temperature (18-30°c) before use.

SAFETY

-Consult chemical safety data sheet prior to use. Observe the precautionary notices displayed on the container.

Reviews

There are no reviews yet.

Be the first to review “VCROM V1 2K Clearcoat Set | QDS Clear (1L) + Hardener(0.5L)”

Your email address will not be published. Required fields are marked *

    Calculate Shipping
    Apply Coupon